hardness degree
英 [ˈhɑːdnɪs dɪˈɡriː]
美 [ˈhɑrdnəs dɪˈɡriː]
n. 硬度标度
双语例句
- Cartons, cardboard resistance broken meter, temperature tracker, coating thickness gauge, hardness and a high degree of regulation, and other devices.
纸箱、纸板耐破度仪、炉温跟踪仪、涂层测厚仪、硬度计、高度规等测试仪器。 - The granule production have high hardness, smooth surface, fully degree of internal maturation.
本机制成的颗粒硬度高、表面光洁、内部熟化程度较充分。 - Hence, the hardness of the tool and the degree to which it remains its hardness at high temperature are important in the selection of a cutting-tool material.
因此，刀具的硬度和它在高温下所能保持的硬度是选择切削刀具材料时的重要因素。 - The hardness of TiC films, to some degree, depends on the amount of the ( 220) peak.
TiC薄膜的高硬度某种程度上取决于TiC（220）峰的丰度。 - Furthermore, it is found that the coating design has an effect on the micro-hardness in some degree and the additive TiO2 can largely develops the wear resistance of the ceramic coating.
另外，涂层设计对硬度有一定影响，TiO2的引入提高了涂层的耐磨性。 - The tensile strength and hardness were increased with increasing the deformation degree. hardness was HB;
与组织转变相对应，其抗拉强度和显微硬度随着变形量的增大而增加，最终抗拉强度比原始材料提高了约130MPa，显微硬度值提高了约30。 - The preparation of acrylic copolymer emulsion used for modification of aqueous polyurethane lacquer for leathers is introduced, which can improve hardness, soft tenacity and plentiful full degree of the waterborne polyurethane lacquer.
介绍了一种用于改性水性PU皮革涂饰液的丙烯酸酯共聚乳液，对水性PU的硬度和韧性进行调节改性，增加其柔韧和饱满度。 - The fine carbon additive in feedstock powders not only increases the hardness of the coatings but also decreases the degree of decarburization.
喷涂粉末中加入细碳粉不仅有利于提高涂层的硬度，而且可减小涂层脱碳程度。 - Retained austenite and hardness are in curvilinear regression of second degree of shedding down, retained austenite and impact toughness are in approximately linear regression.
残余奥氏体量与硬度呈开口向下的二次曲线关系，与冲击韧性近似呈直线关系。 - While water is applied, vacuum degree and pressure release time both affect greatly on pellet hardness; vacuum degree exhibits remarkable influence on the spraying uniformity.
在喷涂水溶液时，真空度、泻压时间对颗粒硬度均有较大的影响真空度对喷涂均匀度有显著影响。 - In coordination with enough CO2, forward space electric field can increase not only the output of fruit and vegetable by a big margin but also the hardness as well as the sugar degree of fruit in green house.
为此，通过实验证明了正向空间电场与足量的CO2相配合能大幅度提高温室果菜产量和果实硬度、糖度。 - Based on the analysis of process features of V-process, the influences of some process parameters, including casting density, mould hardness, vacuum degree, air-extracting rate, etc., were summarized, and the measures to control deviation was proposed.
从V法铸造的工艺特征分析总结了铸件密度、铸型紧实度、负压度及抽气速度等工艺参数及生产作业规范性铸件重量偏差的影响与控制方法。 - The mold hardness under different vacuum degree was tested. The results showed that the mold hardness of EPC process was higher than that of green sand mold and was more uniformly distributed.
不同真空度下消失模铸型硬度的测试结果表明，消失模铸型的硬度高于普通湿型砂铸型，并且硬度分布更均匀。 - Moreover, the fruit hardness degree and the flesh of fruit hardness degree have a positive correlation with the content of insoluble pectin as well as they have a negative correlation with the content of soluble pectin, both of them at a very significant level.
与可溶性果胶呈极显著负相关。不溶性果胶、可溶性果胶含量是影响果实硬度和果肉硬度的直接因素。 - Methods: The surgery of crossing chop phacoemulsification was performed with special chop hook on 71 eyes of 62 cases of senile cataract with nuclear hardness in degree ⅲ-ⅳ.
方法：采用专用劈裂钩横向劈核技术，对62例（71眼）～级硬度核的老年性白内障行超声乳化摘除并后房型人工晶体植入术。 - A kind of hardfacing alloys were developed for impact wear-resistant which is a Fe-Mn-Cr-Mo-V alloy system. After impact experiment the hardness degree of deposited metal increases 66% compare with the hardness degree of deposited metal as welded.
成功研制了一种适用于抗冲击磨料磨损条件下的堆焊合金，合金系统为Fe-Mn-Cr-Mo-V，在受到较大载荷冲击后较焊态堆焊层硬度提高66%。 - The fracture force, hardness and the rigidity have the good degree of correlation, but the correlation between adhesiveness, fracture deformation, recoverable deformation and other target degree is bad.
断裂力、硬度和刚度有较好的相关度，而粘滞性、断裂形变、回复形变与其他指标的相关度较差。 - Studies on Changes of Hardness Degree of Tomato Fruit and Factors Affected Shelf-Life
番茄果实货架期硬度变化及其影响因素的研究 - OBJECTIVE: To prepare theophylline sustained-release tablets, examine the high polymer sustained-release materials and the hardness of the tablets effect on the releasing degree.
目的：制备茶碱缓释片剂，考察高分子缓释材料及片剂硬度对其释放度的影响。 - Non-treatment top roller of high elasticity and low hardness is developing to below Schopper 60A degree.
高弹性低硬度表面不处理胶辊正在向邵尔A60度以下发展。 - Methods With the hardness, tailing degree, spherical degree and coefficient of heavy variation of the dropping pills as the scoring indexes, the proportion of extract and matrix, temperature of extract and refrigerant liquid, internal diameter of the dropper, dropping speed were observed.
方法以滴丸的硬度、拖尾情况、圆整度、大小变异系数等为评分指标，对提取物与基质配比、滴制温度、冷凝液温度、滴制口径、滴速等进行考察。 - The change of hardness, degree of sugar and degree of becoming brown of Shou Peach are studied during the process of CA storage.
采用气调方法对中华寿桃进行贮藏保鲜，研究了寿桃的硬度，糖度以及褐变度的变化。 - No matter what grades the nuclear hardness was, the degree of corneal edema on the first postoperative day was slighter in the microburst mode group than that in the continuous group.
所有术眼术后第1天角膜水肿程度，微爆破组均较连续超声组轻微。 - It expounded the main factors affecting the prickle sensation, such as the cuticle hardness and skin moist degree, temperature and humidity, fiber diameter and fabrics structural characteristics.
阐述了影响刺痒感的主要因素，有角质层的硬度和皮肤潮湿程度等主体因素，温度和湿度等环境因素，纤维直径和织物结构特性等织物因素。 - The results show that the fruit hardness degree and flesh of fruit hardness degree are the index to evaluate the lifespan of the fruit during shelf phase.
结果表明：果实硬度和果肉硬度是衡量果实货架寿命长短的指标。 - In grafting copolymerization, with the epoxy equivalence of epoxy resin increases, the storage stability drops. The film acquires higher hardness degree and tensile strength, lower break elongation and better water resistance at the same time. The best content is 7-10%.
共聚法合成的复合乳液中，随着环氧树脂的环氧当量升高，乳液的贮存稳定性下降，涂膜硬度增大，拉伸强度增大，断裂伸长率下降，涂膜的耐水性变好，环氧树脂用量应控制在7&10%。 - The main conclusion are as follows: The number of precipitation phase is increased after cryogenic treatment. The hardness and strength of AMCs are all increased by different degree. The degree of cryogenic treatment has no distinct impact on properties.
得到的主要结论如下：深冷处理后的复合材料析出相含量有所增加，一次深冷后的复合材料硬度，强度均有不同程度增加，深冷次数对材料力学性能影响不大。